7 Things Nutmeggers Know Before Driving the Merritt Parkway
A single bridge on the Merritt Parkway in Greenwich was hit 150 times over a decade.
Whether your vehicle belongs on the road comes down to more than its height.
Here’s what Nutmeggers know before driving the Merritt Parkway.
Note: This is general information, not legal advice. Parkway vehicle rules are subject to change, so confirm the current requirements with the Connecticut Department of Transportation.
1. Box Trucks and Tractor-Trailers
The Connecticut Department of Transportation (CTDOT) lists a flat no for box trucks and tractor-trailers on the Merritt Parkway.
Your pickup can use the road, but only if it carries a passenger registration and license plate.
Vehicles with combination plates are a different case.
Weight Rules for Combination Plates
On the Merritt Parkway, a vehicle with combination plates is allowed only if its gross vehicle weight is 7,500 pounds or less.
Gross vehicle weight counts the total weight, including whatever you’ve loaded.
A vehicle under that weight still has to stay within the Parkway’s height, width and length limits.
2. Rental Trucks
Rental trucks are banned from the Merritt Parkway, including the truck you reserve for moving day.
The ban says all rental trucks, so the company on your contract doesn’t matter.
Many Nutmeggers know this rule.
If you’re moving, you’ll need another road for the truck.
3. Size Limits
On the Merritt Parkway, your passenger vehicle can’t be taller than 8 feet, longer than 24 feet or wider than 7 feet 6 inches (not counting mirrors).
A passenger car is fine as long as it stays inside all three.
School buses follow separate limits, and CTDOT bars other buses.
A qualifying school bus is a registered, two-axle, four-wheeled bus owned by or under contract to a school or public school district.
It has to weigh 10,000 pounds or less and stay within 8 feet 2 inches high, 7 feet wide and 16 feet 11 inches long.
Buses built for students with special needs get larger limits, up to 10 feet high and 24 feet long.
Add a roof box or a ladder, and you’ve changed your height.
4. Trailers and Campers
The Merritt Parkway prohibits all trailers, from a boat trailer to a utility trailer.
Even a small one.
Recreational vehicles and campers are on the same list.
Your car is fine on its own, but pulling a trailer behind it isn’t.
If you’re towing a camper to a campground, pick a different route for the whole trip.
5. Low Bridges
A Merritt Parkway bridge at King Street in Greenwich was hit 150 times over a decade, according to a 2019 CT Mirror column.
The column adds that the Parkway’s bridges were originally built with a minimum clearance of 11 feet at the abutments, and roadbed regrading has left some even lower.
If your passenger vehicle is taller than 8 feet, the Parkway’s height limit already rules you out.
With bridge clearances this tight, you don’t want to guess at your height.
6. Short Ramps
The Merritt Parkway was designed for 45 mph with short ramps, and stop signs controlled the entrances.
Today, CTDOT says, modern high speed ramps connect the Parkway to other limited access roads, such as Routes 8 and 25.
If you merge from one of those modern ramps, you’re on a different design than the original stop-sign entrances.
7. Funeral Processions
Funeral processions can’t use the Merritt Parkway.
If you’re in a line of cars headed to a service, your group has to take another road.
A hearse can use the Parkway when it isn’t part of a procession and stays within the size limits.
If you’re driving to a service, ask the funeral home which road your group will take.
Speeds and Traffic Volume
The Merritt Parkway runs along Route 15 from the New York line in Greenwich to Exit 54 in Milford.
Outside rush hour, the average speed you’ll meet on the Merritt Parkway is 73 mph, according to a 2022 CT Mirror column.
On a given day, you’re sharing the road with 80,000 to 100,000 vehicles.
Entering by Mistake
If you drive onto the Merritt Parkway in a vehicle it bans, CTDOT’s instructions start with your hazard lights.
Next, pull onto the shoulder or roadside until your vehicle is completely out of the travel way.
Then call 911 for help exiting the Parkway.
If your vehicle breaks down on the Merritt Parkway, a registered wrecker that’s designed, equipped and used exclusively for towing can tow it.
Psst! How much do you know about Connecticut’s roads? Take our quiz and see if you can ace it.
Quiz
Connecticut Road IQ
Answer these questions on Connecticut’s roads and parkway history. We bet you can’t get them all right. Prove us wrong?
In 1901, Connecticut passed a law regulating how fast motor vehicles could go. What was the limit inside city limits?
Exemptions by Permit
The Merritt Parkway's vehicle rules do allow exemptions, and the Office of the State Traffic Administration (OSTA) decides who gets one.
OSTA grants an exemption only when public necessity is served.
Examples include roadway work, deliveries to the Parkway's service plazas, and transporting donor organs and medical supplies.
If your business has contracted work on the Parkway, you can apply with a Parkway Permit application.
A permit has to be in writing, and a state regulation says it lists how long it's valid, which parkway it covers and which vehicle it's for.
The driver has to carry a copy of the permit in the vehicle.
5 Connecticut Property Tax Rules That Hit New Residents the First Fall

A new home comes with a long to-do list, and a bill is easy to overlook.
If you're a new Connecticut homeowner, your first fall may work differently than you'd expect.
5 Connecticut Property Tax Rules That Hit New Residents the First Fall
9 Assumptions About Connecticut That Residents Are Tired of Correcting

Greenwich and Bridgeport sit in the same state, and their household incomes are far apart.
It's one reason Connecticut residents get tired of the assumptions people make.
9 Assumptions About Connecticut That Residents Are Tired of Correcting
